Flow Meter LC Type M25

Compare

Description

Flow Meter LC Type M25

Size 3 ” 

Spesification :

Accuracy/Performance :

Repeatability :Capable of 0.02% or better at any flow rate over entire range

Linearity.

Over 5:1 range

Mech. registration: capable of ± 0.125% or better from max. nom. flow rate

Elect. registration: capable of ±0.10% or better from max. nom. flow rate

Over 10:1 range

Mech. registration: capable of ±0.22% or better from max. nom. flow rate

Elect. registration: capable of ± 0.10% or better from max. nom. flow rate

Over 40:1 range

Mech. registration: capable of ±0.5% or better from max. nom. flow rate

Elect. registration: capable of ±0.15% or better from max. nom. flow rate

Temperature range : -40° F to 160° F (-40° C to 71° C)

Capacity : 1100L/Min ( 300GPM )

Max Pressure : 10.5bar / 150PSI

Type : Direct Reading

Conection : Anzi Flanged , NPT , BSPT , Slip Walled Available

Construction : Meter housing and rotors Cast aluminum or stainless steel

Internal components : Aluminum, Ni-Resist, stainless steel

Seal materials : UL recognized component Buna-N, Viton®1 , Teflon®1

Bearings : Carbon, Teflon, Ni-Resist

Industries served

LC M and MA series meters are well suited for use in industries requiring precise flow measurement and reliable, extended servicelife:

  • Refined petroleum products , Aviation Fuels , LPG, Agricultural chemicals , Paints and coatings, Foods and beverages, Petrochemicals, Pharmaceuticals, Cosmetics, Printing Inks, Textiles .

Construction

Meter housing and rotors

Cast aluminum

Internal components

Aluminum, Ni-Resist, stainless steel

Seal materials

UL recognized component: Buna-N, Viton®1, Teflon®1

Bearings

Carbon, Teflon, Ni-Resist 1Viton and Teflon are registered trademarks of, DuPont Corporation.

Untuk Info katalog Product Lebih Lengkap & Informasi Hubungi :

Sales : Leo

Hp : 082 122 792 896

Atau E-mail : sales@duniaflowmeter.com

 

 

Reviews

There are no reviews yet.

Be the first to review “Flow Meter LC Type M25”

Your email address will not be published. Required fields are marked *